OID and MIB info of Zywall USG 100 from Zyxel

Here is list of OID and MIB information of Zywall USG 100 from Zyxel.

 

index: 1 [from value]—->lo (loopback interface (127.0.0.1))

index: 2 [from value]—->eth_base

index: 3 [from value]—->doll (IPSec related interface (internally usage))

index: 4 [from value]—->eth0(WAN1)

index: 5 [from value]—->eth1(WAN2)

index: 6 [from value]—->eth2(LAN1)

index: 7 [from value]—->eth3(LAN2)

index: 8 [from value]—->eth4(WLAN)

index: 9 [from value]—->eth5(DMZ)

 

 

From SNMP responder

 

Found standard interfaces:
1: (001) lo,Connected,10 MBit/s,Software Loopback,
2: (002) eth_base,Connected,10 MBit/s,Ethernet,
3: (003) doll,Connected,10 MBit/s,Ethernet,
4: (004) eth0,Connected,100 MBit/s,Ethernet,
5: (005) eth1,Not Connected,0 KBit/s,Ethernet,
6: (006) eth2,Connected,1 GBit/s,Ethernet,
7: (007) eth3,Not Connected,0 KBit/s,Ethernet,
8: (008) eth4,Connected,100 MBit/s,Ethernet,
9: (009) eth5,Not Connected,0 KBit/s,Ethernet,

Testing standard interfaces…
Test 1 (1.3.6.1.2.1.2.2.1.10.1,1.3.6.1.2.1.2.2.1.16.1): in=127147  out=
Test 2 (1.3.6.1.2.1.2.2.1.10.2,1.3.6.1.2.1.2.2.1.16.2): in=3481019048  out=1725992473
Test 3 (1.3.6.1.2.1.2.2.1.10.3,1.3.6.1.2.1.2.2.1.16.3): in=0  out=
Test 4 (1.3.6.1.2.1.2.2.1.10.4,1.3.6.1.2.1.2.2.1.16.4): in=1301301037  out=1381333430
Test 5 (1.3.6.1.2.1.2.2.1.10.5,1.3.6.1.2.1.2.2.1.16.5): in=0  out=
Test 6 (1.3.6.1.2.1.2.2.1.10.6,1.3.6.1.2.1.2.2.1.16.6): in=569694848  out=2756928266
Test 7 (1.3.6.1.2.1.2.2.1.10.7,1.3.6.1.2.1.2.2.1.16.7): in=0  out=
Test 8 (1.3.6.1.2.1.2.2.1.10.8,1.3.6.1.2.1.2.2.1.16.8): in=744558039  out=1882705476
Test 9 (1.3.6.1.2.1.2.2.1.10.9,1.3.6.1.2.1.2.2.1.16.9): in=150  out=0