How to configure L3 EtherChannel on TenGigabit X2-10GB-LR

Tweet Configuring Cisco_EtherChannel(conf)# int range tenGigabitEthernet  1/1 – 4 Cisco_EtherChannel(config-if-range)#no switchport Cisco_EtherChannel(config-if-range)#channel-group 10 mode active ; LACP Cisco_EtherChannel(config-if-range)#exit  Cisco_EtherChannel(config)#int port-channel 10 Cisco_EtherChannel(config-if)#no switchport Cisco_EtherChannel(config-if)#ip address…

Continue Reading...

EtherChannel configure mode with PAgP

Tweet PAgP facilitates the automatic creation of EtherChannel links by exchanging packets between channel-capable ports. The protocol learns the capabilities of port groups dynamically and…

Continue Reading...