[Cisco] Access Server setup for the LAB(CCIE)
Tweet Here is some tips to setup Cisco Access Server (Cisco 2509 or Cisco 2511) on your lab environment. I hope it help you to…
[Cisco] How to enable Log and logging buffer
Tweet When you got an outage, you want to see a log first on your device. Well, if you have NMS or SNMP tool, you…
How to read Cisco FastEthernet Interface status
Tweet Sometimes, by looking over some basic or fundamental information during troubleshooting, we got wrong path and wasted hack of time. If you carefully reviewed…
Cisco Service Config Error Messages
Tweet Occasionally, during bootup of Cisco hardware through Cisco IOS software, error messages similar to these are displayed: %Error opening tftp://255.255.255.255/network-confg (Socket error) %Error opening…
How to recognize Cisco IOS image file ?
Tweet Reading Cisco IOS Image file name. For example, c2500-is-l.113-11c.bin File name Version In general IOS file name looks like xxxx-yyyy-zzz. xxxx = Platform yyyy…
[Cisco]What is error for ‘input packets with dribble condition detected’
Tweet While I was troubleshooting TCP throughput issue today, some of status on the FastEthernet interface brought my attention. "xxxx input packets with dribble condition…
Three Cisco Switching methods
Tweet There are three major switching mode in Cisco devices. Here is the three switching methods with commands to enable it. 1. Process Switching –…
How to Cisco Banner in other language(8bit)
Tweet If you want to put a warning message in your own language on Cisco box. Especially it requires 8 bit code. You can change…
[log] :Problem with RX packet, length is 1, what is it?
Tweet If you are running kinds of old IOS on your Cisco gear, you might see this. Per Cisco it is an known issue, bug…
Network Settings In VMWare Player
Tweet Free VMWare player or VMWare Server software are one of my favorite tools ever. Especially, for network testing and simulation such as Cisco Dynamips,…
[PC] Stop using HyperTerminal as your telnet client
Tweet If you want to stop using Hyper Terminal as your default telnet client, you need to modify your registry file. To perform this procedure,…
How to create loopback interface on Windows XP
Tweet The Loopback adapter is a testing tool for a virtual network environment where network access is not available. Also, you must use the Loopback…
The www.ipBalance.com runs by a volunteer group with IT professionals and experts at least over 25 years of experience developing and troubleshooting IT in general. ipBalance.com is a free online resource that offers IT tutorials, tools, product reviews, and other resources to help you and your need.
Recent Comments