BGP Community String for LUKoil Inform AS13105

Attention

This BGP Community string information might be outdated. Please contact LUKoil Inform AS13105 to get more recent one. This BGP communites is ONLY for the customer who has BGP with LUKoil Inform AS13105. www.ipbalance.com is not maintaining this BGP Community string.

BGP Communities String for peer

BGP Communities may be used by peers when talking to AS13105

13105:102X – Ruscomnet, AS21414
13105:103X – MTU-Intel, 8359
13105:104x – Equant. AS2854
13105:105X – MSK-IX Peers
13105:106X – Corbina Telecom, AS8402

X = 1,2,4 or 6 – prepend 13105 (1,2,4 or 6) times
0 – do not advertise
Any other community 13105:* are deleted.

Markers:
13105:123 – Equant paths
13105:124 – RusComNet Paths
13105:125 – Corbina Telecom Paths
13105:126 – MSK-IX Paths
13105:127 – MTU-Intel Paths

 

 

Applying BGP Community string with sample configuration

1. Get the latest BGP community string from your ISP/upstream provider or checkwww.ShowipBGP.com.

2. Pick the best BGP community string for your traffic shaping plan (mainly incoming traffic). Most of ISPs are providing BGP community string with local preference and AS prepending option. Cannot tell which one is better than the other. It will depend on your global traffic shaping plan.

3. Follow the below commands ( Cisco only )

The below Sample configuration will tag the 10.0.0.0/24 route with [ISP AS]:120 or [ISP AS]:3 and will not tag any other routes.


router#config t
router(config)#ip bgp-community new-format
router(config)#access-list 10 permit 10.0.0.0 0.0.0.255
router(config)#access-list 10 deny any

router(config)#route-map [to-ISP] permit 10
router(config-route-map)#match ip address 10
router(config-route-map)#set community [ISP AS]:120 <—- using Local Preference

or

router(config-route-map)#set community [ISP AS]:3 <——- using AS prepending
router(config-route-map)#route-map [to-ISP] permit 20
router(config-
route-map)#exit

router(config)#router bgp [xxxx] <——————————- xxxx = customer’s ASN
router(config-router)#neighbor x.x.x.x send-community
router(config-router)#neighbor x.x.x.x route-map [to-ISP] out
router(config-router)#exit
router(config)#exit
router#copy running-config startup-config


4. And then, go to www.RouteServer.org and pick one of route server on the map to see your announcement. If you are using AS prepending option, you will see your AS prepends on route servers. Sometime you might not see your route with particular ISP path.
In most of case it might not be any routing problem, just the route path was dropped at somewhere by BGP best path selection scheme. Try Oregon route server, if you can see your route. The Oregon route server is providing many possible and available paths between BGP speakers and neighbors.
If you don’t see your route on there? check other route servers and also check your
BGP configuration. You might need to contact your upstream provider to check what they are learning BGP route from you.


 

Trouble use below phone to contact

phone: +7 095 9737602, +7 095 927 6069, +7 095 9734011, +7 095 933 9317
fax-no: +7 095 9160020
modified for Russian phone area changes

 

 

Leave a Reply