Cisco Embedded-Service-Engine configuration and tips

First of all, the Embedded Service Engine has minimum memory requirement. 1GB for Cisco 2911 and 2921 1.5GB for Cisco 2951 2GB for Cisco 3925…

Continue Reading...

Cisco Unified CME 9.5 Supported Firmware, Platforms and etc

Here is link for Cisco Unified CME 9.5 Supported Firmware, Platforms, Memory, and Voice Products

Continue Reading...

Hiding Cisco logging/warning messages by supressing

I got an old Cisco 2811 from ebay with cheap price. Out of box, I got below warning message. *Sep 10 01:29:05.887: %ENVMON-4-FAN_LOW_RPM: Fan 1 service…

Continue Reading...

Howto Configure Cisco Unified Communication Express in GNS3

How to create Cisco VoIP lab with Cisco Unified Communication Express in GNS3     1. Brief GNS3 version : 0.8.7 Cisco Router IOS :…

Continue Reading...

Public NTP server IP addresses

Here is popular list of public NTP server IP address time-a.nist.gov  (129.6.15.28) time-b.nist.gov  (129.6.15.29) time-b.nist.gov  (129.6.15.30) time.windows.com  (207.46.232.182) ntp.asql.co.uk  (82.68.206.125) chronos.csr.net  (194.35.252.5) time.nist.gov  (192.43.244.18) https://tf.nist.gov/tf-cgi/servers.cgi…

Continue Reading...

How to configure DHCP reservation on Cisco 3750

Here is steps to configure DHCP reservation with MAC address on Cisco Catalyst 3750   IP Pool : 10.10.10.0/24 MAC#1 :  1111.2222.3333 MAC#2 :  4444.5555.6666…

Continue Reading...

Avaya ERS 5500 switch SNMP OIDs

Here is some SNMP OID for Avaya ERS switches.   envFans: 1.3.6.1.4.1.45.1.6.3.3.1.1.10.6 envTemp: 1.3.6.1.4.1.45.1.6.3.7.1.1.5.5 cpuLast10Seconds: 1.3.6.1.4.1.45.1.6.3.8.1.1.11.3 cpuLast1Minute: 1.3.6.1.4.1.45.1.6.3.8.1.1.5.3 cpuLast10Minutes: 1.3.6.1.4.1.45.1.6.3.8.1.1.6.3 cpuLast1Hour: 1.3.6.1.4.1.45.1.6.3.8.1.1.7.3 cpuLast24Hours: 1.3.6.1.4.1.45.1.6.3.8.1.1.8.3 cpuTotal: 1.3.6.1.4.1.45.1.6.3.8.1.1.4.3…

Continue Reading...

Syslog configuration in best practice

  Avaya ERS switches logging buffered 64000 logging monitor informational aaa authentication login default group radius local  log config   logging enable   logging size…

Continue Reading...
IP change vCenter Appliance5-1.png

How to change IP address of vCenter Appliance 5.5 in console mode

When you installed VMware vCenter Appliance 5.5 from OVA file, often forgot to enable network port.  Here is how to enable and add/change IP address…

Continue Reading...

VoIP QoS tips and configuration in best practice

VoIP QoS tips and configuration in best practice   Remember "QoS is ONLY happening, when congestion on the circuit". In general QoS is more useful…

Continue Reading...

Multiple links between Avaya ERS 5500 and Cisco switch

Multiple links between Avaya ERS 5500 and Cisco switch

Continue Reading...

How to factory reset Cisco CP-7911G VoIP phone

How to factory reset Cisco CP-7911G VoIP phone   A. Factory reset 1. Power off 2. Hold " # " button + power on. 3….

Continue Reading...