google_alerts.png

Monitoring your website by Google Alerts

Tweet If you see incoming traffic is certainly dropped, you need to review whether the site got hacked or not. If you are not savvy…

Continue Reading...

What is UDLD protocol ?

Tweet  In order to detect the unidirectional links before the forwarding loop is created, Cisco designed and implemented the UDLD protocol. UDLD is a Layer…

Continue Reading...

How to calculate full mesh WAN links

There are three different type of network topologies. 1. Hub-and-spoke 2. Full mesh 3. Hybrid   How to calculate WAN links?   Here is how…

Continue Reading...

Link State Routing Protocols Drawback

Tweet Link State routing protocols, such as OSPF and IS-IS, converge more quickly than their distance vector routing protocols such as RIPv1, RIPv2, EIGRP and…

Continue Reading...

What Route Reflectors does ?

Tweet Within any BGP autonomous system, every IBGP speaker must have a fully meshed peering arrangement with every other iBGP speaker. This is due to…

Continue Reading...

Light level of fiber cable for 1000BASE-LX/LH

Tweet Here is light level information for single mode fiber for Gigabit Ethernet port. Most of cases, it doesn’t matter of how many port or…

Continue Reading...

[Enterasys] Port Mirroring Sample Configuration

Tweet source port 1/13 destinaion port 1/10 Console(Config)#interface Ethernet 1/1 Console(Config-if)#port monitor Ethernet 1/4 Console(Config-if)#

Continue Reading...

What is CNSP and PNSP ?

Tweet PSNP(Partial Sequence Number PDU) are used to acknowledge the receipt or to request the retransmission of the latest version of an LSP while the…

Continue Reading...

Protocols ISIS VS. OSPF

Tweet L2 routers are similar to OSPF backbone routers, and the set of L2 routers (including L1/L2 routers) and their interconnecting links make up the…

Continue Reading...

EIGRP metric is calculation

Tweet By default, EIGRP uses only bandwidth and Delay when calculating the metric. EIGRP uses these scaled values to determine the total metric to the…

Continue Reading...
Stimator start page picture

Calculate a website’s value ?

Tweet Have you ever thought about your website value? There are sites out there interent. One I found today iscalled $stimator.com. Not sure it is…

Continue Reading...

EtherChannel configure mode with PAgP

Tweet PAgP facilitates the automatic creation of EtherChannel links by exchanging packets between channel-capable ports. The protocol learns the capabilities of port groups dynamically and…

Continue Reading...